Using EMan over TCP Bridge

1) Go to Configure->Manage Meter Comms Configurations

2) select 'Create a new Hardware Profile' in the dropdown and click the '...' button

3) enter the server's name as name
4) select Remote-TCP/IP
5) and protocol type IEC
6) set connection type to Remote
7) and click Save

8) click on the '...' button under 'Meter Settings'
and enter the server's domain or IP under Host name and 10001 under Port No
9) click OK

10) double click the status bar on the main screen

11) and double click the meter you just setup for reading