Under Reports you will now find the BMSRTU Bypass Report


The Date range can be selected for any desired period. (Default to preview the previous 30days.) Note: The End Date is currently Under Construction and cannot be changed.

The first column contains the Meter Account/ Shop Name and Number.
The second column contains the BMSRTU Serial Number. (All BMSRTUs version 6.0 or greater.)
The Theard column (under construction) will contain the BMSRTU Name.
The forth column (now the third) contains the total time that the BMSRTU were affected by a bypass (Odometer) for the selected time period.
The last column is the count of events causing a bypass.

The following is an explanation of how to interpret the Bypass logs of a BMSRTU.

The BMSRTU Logs all bypass events.
The Cancel is logged once someone manually presses the Cancel button on the unit.
The Bypass is logged once someone manually presses the Bypass button on the unit, only if the button switches on some lights.
(If the button is pressed while the lights are all still on, the button press itself will not be logged, only the bypass event at the moment when the lights would normally have switched off.)
Remote or Online, Bypass and Cancelation, events are not Logged as a separate event.
Once the BMSRTU regains Power (Power Up) after a power outage a log is kept and the current relay state logged.
All Events have a start (1) and end (0)
R1-4 is a log of the effect the Bypass had on the individual relay:
In the following example the Bypass was pressed Log#65 while all the relays were scheduled to be off.
As a result all the relays were affected and logged as 1.
Log#66 relay 1 was scheduled to switch on and is now logged as 0.

[table="width: 500, class: grid"]
# Date R1 R2 R3 R4 Power Bypass Cancel
65 2013-08-20 14:45:45 1 1 1 1 0 1 0
66 2013-08-20 14:46:00 0 1 1 1 0 0 0
67 2013-08-20 14:47:00 0 0 1 1 0 0 0
68 2013-08-20 14:48:00 0 0 0 1 0 0 0
69 2013-08-20 14:49:00 0 0 0 0 0 0 0

This log can be found at the bottom of the Edit BMSRTU screen of each BMSRTU