How do you apply the Ekurhuleni network access charge on PnPScada? (In other words, how do you enter it in the tariff?)

Depending on the tariff, Ekurhuleni specify that the Network access charge is based on the kVA usage during peak and standard hours only.
This would mean that you would firstly need to ensure you have the calendar setup for No-Season but have MD-ON for Peak & STD times configured and MD-Off for the off-peak.
Then when creating your Tariff, you would add another line item and choose the type "Maximum demand (TOU)", then you need to choose the Calendar period that was created. Lastly a couple of tick boxes need to be ticked,
- Enable Automatic Historical Maximum demand Penalty, measured over 1 year
- Force 1 line
Once this is done, the rate can be put in, and the tariff verified.
If you need help with this, you can contact me on kevin@globinet.co.za

Thank you for your reply Kevinf.
I'm still going wrong somewhere as the NAC value returned is the same as the demand value.
I'll contact you soon on the supplied email address. Thanks again.